Time to update this; I noticed that the exhaust ports don't line up so good. There are differences between DET and VE, so to solve this, simply enlarge the four bolt holes in the middle, and push it upwards when installing. Use the VET gasket to guide you on how much to enlarge the holes: http://i.i...

Couldn't wait for parts, so I drilled and tapped the GTIR exhaust manifold for the sensors. Worth noticing is to place the sensors 40mm (1½") from the head, and in my case I needed an 8,5mm drillbit + 1/8 NPT tap.

I just did some late night ebay shopping. I've been reading up on more advanced tuning theories, and wanted to expand my ability to monitor the engine. Here's what I chose: http://i.imgur.com/EOz1x0W.png You might be asking yourself, Dala, why do you need that? Let me explain. I want to get back my ...

The USDM B13 ECU came in the mail! I immediately dropped it off at dad's work, where they soldered a 40pin connector onto it, and moved the CJ1 surface resistor to CJ2 position, so it can accept a daughterboard. Oh, and the circuit board was re-clearcoated aswell, to avoid corrosion in the future. h...

Dala, you got very nice Nissan :) But I have to ask: How old this car is? From 90's? I like its curves :D I know, I know, my english sucks, but you maybe understood that :lol: Thanks man! Yep, it's from the 90's, 1991 to be more correct. Strut tower brace maybe? ;) Spot on! I put a few more hours i...

Not much has happened, I'm waiting on parts :) Uninstalled Nismotronic from my european ECU. It's a shame, since the PCB has been professionally re-clearcoated, gonna have to do the same to the new one http://i.imgur.com/66XUOE2.jpg Manifold installed, I try to sleeve as much of the cables I can whe...

Some pictures of the actual install: The bottle and motor, 15$ IIRC http://i.imgur.com/T9QCxLB.jpg Where I mounted it in the bay, it's pretty down low, not really visible unless you look from it above. http://i.imgur.com/xy0uHxv.jpg Testing, works perfectly! http://i.imgur.com/myHXAPs.jpg Sorry for ...

Mightycarmods recently did a video on intercooler water sprayers, figured I would make one myself http://i.imgur.com/KmGC5Rp.png Here's a rough draft, I already drilled holes in the front bumper, and mounted the windshield sprayers. I have the bottle+motor already too! To control it, I'm going to us...

Not much to update, I just clean everything I dissasemble, and it will make a huge difference later on http://i.imgur.com/C5jcTb4.jpg Another part I cleaned and modified is the idle control system. I turned the AAC valve 180 degrees (red arrow) to make the manifold less crowded. You'll see what I me...

Where is this car located? I find this really intresting project and it seems you really know what you are doing. Keep us posted, and welcome to forum! 8-) It's in Vaasa atm, added my paikkakunta to profile page. Tonight I drilled and tapped the manifold for three additional 3/8 NPT vacuum/boost po...

That is a real bad-ass! I had the B12 Sunny so naturally this B13 model was in my mind when I was looking for a new car. Now looking at this, I realize one couldn't do it better than this. There's been so many CA18DET installed in these but this could be the first SR20 in Finland? Even without Turb...

Winter is almost here. :( Vehicle taken off the road, and upgrades will happen :) Emptied the last E85 out of the car, went and filled it up with regular 98 octane. This is neccessary when you store a car for longer than 90 days. If you don't, water will separate from the ethanol, and fall to the bo...

Forgot to make a list of the go fast bits: -JDM SR20VE 10.3:1 Compression ratio -Gspec underdrive waterpump pulley -2.5" custom exhaust all the way (1.25" is stock!) -Innovate MTX-L Wideband -Nismotronic engine management system -RE85 tune (flexfuel vehicle) -Subaru STI 513cc injectors -Bluebird tur...

Pete, I had VW angel eyes on my first 1.6L 100NX,


JonttuK
I'd like to keep it on the road as much as possible, so street"legal" it is (I remove the turbo bits for katsastus). It will hibernate during winter, and I plan to make some tweaks to the engine.

My finnish sucks, so this thread is going to be in english :) Hi everybody, my name is Dala, and my current project is a german imported 100NX GTi. When I bought it: http://i.imgur.com/yHksDu1.jpg Repainted: http://imageshack.com/a/img600/6482/mlv3.jpg New engine: http://img818.imageshack.us/img818/...