Dala's EVNX
Dala's EVNX
Original thread from 2018: https://secondlifestorage.com/showthread.php?tid=4577
I've done some thinking, and I'm leaning towards kickstarting this build again. With my newfound EV skills, I feel like I'm in a position where I could build a proper EV conversion. The build would ofcourse be linked to Dala's EV Repair somehow, and maybe in a Youtube build format. Nissan SR20VE 6-speed gearbox, mated to a Nissan Leaf EM57 motor
Motivational picture, my 1991 NX ca 2014
Thoughts?
I've done some thinking, and I'm leaning towards kickstarting this build again. With my newfound EV skills, I feel like I'm in a position where I could build a proper EV conversion. The build would ofcourse be linked to Dala's EV Repair somehow, and maybe in a Youtube build format. Nissan SR20VE 6-speed gearbox, mated to a Nissan Leaf EM57 motor
Motivational picture, my 1991 NX ca 2014
Thoughts?
Re: Dala's EVNX
Sounds like a plan.
Good luck
Good luck
Re: Dala's EVNX
Episode 0 now out!
Re: Dala's EVNX
Short history about the NX shell, along with some progress on cleaning up the remnants after the ICE
Re: Dala's EVNX
Parts are being purchased! In this episode I show what my usual approach is when it comes to finding salvage yard bits and pieces!
Re: Dala's EVNX
So the motor that I ordered from Norway is finally here. In this short video, I proceed with tearing it down so that I can start to measure if it will be even possible to mate it with the SR6speed gearbox. Enjoy!
Re: Dala's EVNX
Last weekend I got the pedal setup figured out on the EVNX, here's a video on how hard it was to fit the Volkswagen Touran drive-by-wire into the car
Re: Dala's EVNX
Most of the adapter plate is now complete, check out how I managed with only hand tools
Re: Dala's EVNX
The adapter plate & clutch adapter is now aligned and permanently attached to each other. Feels good having this crucial step completed! Check out how we managed with the adapter plate using only hand tools!
Re: Dala's EVNX
Sneak peak on the next episode, making motor mounts!
Re: Dala's EVNX
Still haven't finished the video, we are going to try and fit all fabrication needed to make the motor sit permanently in the engine bay. Another sneak peak on the axle carrier bracket fabrication progress:
Re: Dala's EVNX
So here it is. This is the most effort the videos have taken so far, I had massive problems with the axle carrier bracket. So glad this is finished now and I can focus on the battery
Re: Dala's EVNX
So now my focus has shifted towards getting the suspension sorted:
And also getting the battery mounted:
Videos on both these topics incoming soon!
And also getting the battery mounted:
Videos on both these topics incoming soon!
Re: Dala's EVNX
Well that battery mounting is going to be a tight squeeze.
Looking forward to it.
Looking forward to it.
Re: Dala's EVNX
It sure will be
Suspension is stuck waiting on parts, so here's the progress we made on the battery pack!
Suspension is stuck waiting on parts, so here's the progress we made on the battery pack!
Who is online
Users browsing this forum: No registered users and 8 guests