bPXytZB YufTrgj 10askTn http://i.imgur.com/10askTn.jpg Thx :) Yesterday a package I've been waiting an eternity for showed up. I present to you, the NEMU bluetooth module: http://i.imgur.com/YufTrgj.jpg Installation is pretty straightforward. Remove ECU from car, remove NEMU, solder 4-pin connector,...

This weekend I made progress on several areas, it all started with an oil+filter change... I then simplified my air intake significantly. The new one was made from a leftover intercooler pipe, here you can see the old above, and the new below: http://i.imgur.com/eYPBDwV.jpg Let me explain to you why...

Thought I might post up some more info about injecting water into the engine. Do note that this is a highly discussed topic, with many different opinions on where to inject, how much to inject, what timing and air/fuel ratio to aim for with water injection etc. The setup I am shooting for will in mo...

What did I do today? I just ordered a 126ml/min methanol nozzle, looks something like this http://i.ebayimg.com/00/s/MzM2WDQ3MA==/z/8vEAAOxy0bRTE2hy/$_12.JPG The reason I'm piecing together a water/meth injection kit from scratch instead of just buying everything in a 300-400€ combo, is because I do...

Long time no post, but now I'm back at it! I just finished handing in my thesis for final evaluation, and will be collecting my bachelor's degree in electrical/automation later this month. All evenings free wohoo! Back to the build, mounted the arduino permanently(will post pic after cleaning it up)...

Finished my opensource flex fuel converter, here's the code for an Arduino Uno + LCD /******************************************************* This program will sample a 50-150hz signal depending on ethanol content, and output a 0-5V signal via PWM. Connect PWM output to NEMU Breakoutboard on ADC0-3,...

It's getting warmer and warmer every day

Installed a remote lock/unlocking kit, now I can finally stop fiddlig around with the old worn lock on the driversdoor!


I need to change to summertires asap, I chirp 1st,2nd and 3rd!

Flex fuel sensor mounted on return line and microcontroller stashed in the glovebox. Works beautifully! http://i.imgur.com/uUcgKiD.jpg The idee of a 14€ homemade converter+display really took off on sr20forum, so I'm making an open source solution for arduinos, will look something like this: http://...

The planned projects for 2015 keep on piling up! Ordered a Bluetooth module for Nismotronic, it looks like this http://www.nismotronic.com/images/bt_d2.jpg With a bluetooth module, I can pair up an android device with Nismotronic. This is what a tablet/mobilephone running tunerview looks like https:...

Time to make this car into a flex-fuel vehicle! In Nismotronic, you can add a flex fuel sensor into the breakout board (0-5V), and have it control IPW from 1.00-3.00, Advancing/retarding spark and finally adding/reducing wastegate duty-cycle. This is what the flex setup page looks like in Nismotroni...

I have craved an engine heater for a long time, and now they were -10% off at the local carpartstore. Let's get one! I went with a Defa kit. Total for these was 124€, and on the other side of town a similar kit was priced at 220€! http://i.imgur.com/xocfLb2.jpg This is how it all connects. http://i....

Happy new year! 2015 will be an interesting year for sure! Picked up some Ground Zero 50W-RMS speakers. I've been running speakerless doors, so this will be a long awaited upgrade. Let's tear up the doors! http://i.imgur.com/4I1eEA3.jpg Speakers didn't fit (too wide), so I had to fabricate some wood...

Thanks! I need to winterize this car. Badly. After driving it this week, the weather got colder and alot of snow/ice showed up. Now there is zero traction with my un studded winter tyres. I parked the car at the garage, and it will stay there until I get it ready for winter. I did have time to boost...

Great day today. Started some road tuning with a mate, and immediately blew a coupler from the cold charge air pipe. After fixing the leak, we went on with tuning the electronic boost controller. http://i.imgur.com/Ka0NbCD.png Short summary, I love it! spool up is greatly improved, due to the initia...

This was a busy weekend. I made the final push to get it driveable again. Exhaust gasket material. Made one gasket for the downpipe (hadn't been running any gasket, developed a small leak), and one gasket for the warm charge air that connects to the turbocharger. http://i.imgur.com/tSUIgD3.jpg Insta...